Skip to Main Content
Back to Navigation
Display large rendition: Product shot #0
Display large rendition: Product shot #1
Display large rendition: Product shot #2
Display large rendition: Product shot #3
Display large rendition: Product shot #4
Display large rendition: Product shot #5
Display large rendition: Product shot #6
Display large rendition: Product shot #7
Display large rendition: Product shot #8
Display large rendition: Product shot #9
Display large rendition: Product shot #10
Display large rendition: Product shot #11
Display large rendition: Product shot #12
Display large rendition: Product shot #13

+ 14 more

Product shot #0
Product shot #1
Product shot #2
Product shot #3
Product shot #4
Product shot #5
Product shot #6
Product shot #7
Product shot #8
Product shot #9
Product shot #10
Product shot #11
Product shot #12
Product shot #13
Kreg

Kreg Crosscut Guide Station

Model #KMA4100 Item #305506 UPC 00647096810467
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Tap to view
Product overview
The Crosscut Station gives the capabilities of a miter saw with just a circular saw and Kreg guided cutting. Crosscut boards wider than most compound miter saws can handle (up to 12 In. at 90 Deg.). Make a variety of angle and miter cuts from 0 to 45 Deg. with the adjustable fence and positive stops at 0 and 45 Deg. An MDF base and SureCut backboard act as a sacrificial surface for splinter-free cutting results. The MDF base also functions as a kerf line so you can clearly see the blades path and know exactly where your saw will cut every time. Use material support wings and the detachable blocks to cut long boards safely by supporting offcuts. They pull out easily when more support is needed, and tuck back in when not in use. The Crosscut Station is quick to set up and easy to store away. Its compact design even makes it portable when you need accurate crosscuts and angle cuts on the go. Works with left or right blade circular saws.
  • Crosscut up to 12" wide (305mm) and make a variety of miter cuts from 0 to 45
  • MDF base and backboard act as sacrificial surface for splinter-free cutting
  • A kerf line you cut into the MDF base shows exactly where your saw will cut
  • Material support wings with detachable blocks add offcut support for long pieces
  • Works with left-or right-blade circular saws

Product manuals and information

  • Buying Guides
  • Related Product Articles
  • California Prop-65 Warning WARNING:

    Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.p65warnings.ca.gov/wood.
    WARNING:

    Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.p65warnings.ca.gov/wood.
  • Request Safety Data Sheet (SDS)
Dimensions 9.13 In. W. x 5.11 In. H. x 16.25 In. L.
Cut Width 12 In.
Brand Kreg
UPC 00647096810467